- Are all of your products in stock?
- Does Arizona Tile provide a design service?
Should I be concerned about radon in granite?
No. Scientific studies have found that granite countertops pose no significant radon or radiation risk. While it's true that some types of granite do emit radon gas, the studies have shown that even the most active test samples of granite most commonly used in US countertops contribute emissions that are below the levels requiring EPA-recommended remediation. And most fall below what the EPA would consider "background levels" of radon.
- Should I buy extra material? How much?
What do some of the terms on your site mean, such as honed, rectified, listelle, etc.?
For definitions to various terms, please visit our Glossary of Terms.
What do you offer as custom-made products?
We have a variety of custom items including medallions, fireplaces, columns, mosaics and decorative listelles. There are also a variety of natural stones in many different sizes and colors. Please contact your nearest location for details.
What is California Proposition 65?
California's Proposition 65 entitles California consumers to special warnings for certain products that contain chemicals above certain threshold levels. The general Proposition 65 notice is as follows:
WARNING: Some porcelain products, as noted on the pertinent product pages within this website, contain Lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm.
WARNING: Granite, Marble, Quartzite and Quartz products, as noted on those product pages within this website, contain Crystalline Silica, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm.
What is filled? Unfilled?
These terms refer to travertine stone. Travertine has holes naturally. The holes will either be filled at the factory or filled when the stone is installed. Filled vs. unfilled products provide a very different look, therefore it is important to view both materials in an installed setting to determine the look most preferred.
- What is your return policy?
Are your locations open to the public?
Yes, we are open to the public. Our showrooms are a great place to collect ideas for your project and our informative staff is happy to assist in your selections. Please contact your nearest showroom location for hours of operation.
How big of a grout joint should be expected for tile/stone?
The standard grout joint is 3/16". Many factors determine the size of a grout joint, therefore it is important to discuss this with your installer. For more information, please refer to The Tile Council of North America's website.
If I install glass tile in my pool, will the pool chemicals, such as chlorine and acid, cause any problems?
No, pools chemicals, such as chlorine and acid, will not harm the glass tile. Glass is acid-proof. Chemicals and the water can cause calcium deposits on the tile waterline, but can be cleaned off using a pumice stone and tile cleaner. However, the grout used in the installation, and every other aspect of installation needs to be chosen carefully and done correctly by your installer.
- What about seams and placement of slabs—who determines that?
- Will setting tile on a diagonal require more material?
- Are all granite colors available in tile form?
- Can I customize a medallion?
- Can I get samples or your products?
- Can I hand-pick my natural stone?
Can I pick my slabs in my home state?
Most of our locations have slab areas where you can approve materials. Contact your nearest location for more information.
Can slate be used in the shower?
Slate is not usually recommended for inside a shower area due the oxidization that can occur. However, we recommend other materials that don't oxidize, such as quartzite. Quartzite has some of the variation you see in slate, but is comprised of other minerals that tend to hold up better in a shower application. Quartzite is a natural stone, therefore sealing is recommended. Another alternative would be porcelain tiles, which resemble the look of slate and do not require sealing.
Can slate be used outside, in uncovered areas? If it flakes, is that normal?
Due to the fact that slate is a natural product, there are minerals in it that may weather differently over time. Slate is used for exterior installations in many climates that do not experience freeze/thaw conditions. As far as flaking, this is typically referred to as shaleing and is a normal characteristic of slate due to the layers in this type of stone.
How should I decide which type of product to use?
The application (for use in a shower, floor, etc.) and the traffic levels it will experience will determine the type of tile you should select. All of our floor tiles are durable enough for residential use. We also have products made specifically for commercial applications. We are happy to direct you to the product that best suits your needs.
- Can porcelain tile be used outdoors?
Can I install porcelain tile on my patio?
If your patio is covered or screened in, porcelain is a great product to install outdoors where it is not subject to the harsher elements of weather. When porcelain tile is exposed and can have fine dust settle on it, or become wet because it is near a pool or sprinklers, it is important to select a porcelain tile that is appropriate for this use. In this type of application, Arizona Tile recommends installing our R11 Anti-Slip Finish. No surface is “slip-proof”, but the R11 Anti-Slip Finish is specifically designed for outdoor, exposed areas as well as wet applications, including shower floors. To be certified as R11 Anti-Slip, a tile must pass internationally-recognized testing.
If a tile passes the DCOF (dynamic coefficient of friction) requirements of 0.42, which measures slip resistance, doesn’t that mean it’s safe to use anywhere?
The DCOF is part of the ANSI (American National Standards Institute) standard specifications for tile and measures a tile’s frictional resistance in an interior setting, not exterior. The DCOF measurement is not a true measurement of the flooring, but rather a measurement of the interaction between the flooring and what is being placed on it. It can be a useful comparison of tile surfaces, but it cannot predict the likelihood a person will or will not slip on a tile surface. Because many variables affect the risk of a slip occurring, the DCOF test results should not be the only factor in determining the appropriateness of a tile for a particular application.
What can I use in a pool or fountain? A steam shower?
In fountains and pools the material used most commonly at the water line is porcelain tile. Other products that also work well are glass tiles, granite, and a few quartzites (Golden Gate, Golden Green, Ostrich Grey). If the tile isn't continually submerged under water, there are many other decorative products that may be used as well. For a steam shower, granite, porcelain and glass tile are the most durable products.
What is the difference between natural stone tile vs. ceramic/porcelain tile?
Both materials are of excellent quality and durability. Ceramic/porcelain tile is a man-made product and natural stone is quarried from the earth. Natural stone is varied in color and no two pieces ever look the same. It is unique and timeless. Many ceramic/porcelain tiles are made to mimic some type of stone. They are a bit more controlled in range and variation, however many people have difficulty distinguishing between natural stone and ceramic/porcelain tile due to the advanced technology used today. Natural stone requires periodic maintenance vs. ceramic/porcelain, which requires no extended upkeep and is virtually maintenance-free.
What trim pieces are available?
The availability of trim pieces varies based on the product selected. Please refer to the products section for more information.
Care And Maintenance
- Can I use a steam cleaner to clean my tile and grout?
- Can the holes in travertine be filled?
Do I need to seal my granite countertops?
Yes, granite countertops should be sealed periodically. In a new installation, ask your installer if the countertop has been sealed and what product was used. If it has not been sealed, then use a penetrating sealer made for granite. Sealers, cleaners and other products can be purchased at your nearest location. Sealing granite will provide a barrier that will give you time to clean up a spill before it penetrates into the stone.
- How do I keep the grout clean?
- How do I repair cracked tile/cracked grout?
How often do I need to seal my countertops, stone floors, marble vanity tops, etc.?
The frequency in which you need to seal your stone surface depends on the area in which the stone is installed. On average, it should be sealed every one to three years. Higher traffic areas may need to be sealed more often. There are several variables that affect this timeframe:
- The type of stone and its porosity
- The traffic in your business or home
- How often you clean your floor
- The type of sealer that has been used previously
If you are going to work with a company to have your stone sealed, they may be able to create a recommended schedule for resealing based on these variables.
- Should I seal my grout?
What is the best way to maintain my granite/marble/stone/tile?
For everyday cleaning, simply use a Ph-balanced natural stone cleaner to care for your stone. Natural stone needs to be sealed after installation. There are many sealers on the market that are made specifically for natural stone as well as companies that specialize in sealing and maintaining natural stone.
- What is the difference between sealing and enhancing?
- Will germs collect on my granite?